Aerio L4-2.3L (2006)
Back Window Glass: Removal and Replacement
Back Window (For Sedan Model) Removal and Installation
Back Window (For Sedan Model) Components
Refer to Windshield Removal and Installation as removal and installation procedures are basically the same. However, note the following.
^
Observe the following precautions when applying adhesive (1) along glass (2) edge.
^
Adhesive (1) should be applied evenly especially in height.
^
Be careful not to damage primer (3).
^
Press glass against body quickly after adhesive (1) is applied.
Adhesive amount specifications and position for back window
Width "a": 7 mm (0.28 in.)
Height "b": 14 mm (0.55 in.)
Position "c": 6 mm (0.23 in.)
Width "d": 14 mm (0.55 in.)
