Aerio L4-2.3L (2006)
Liftgate Window Glass: Procedures
Refer to "Windshield Removal and Installation:" as removal and installation procedures are basically the same.
However, note the following.
-
Observe the following precautions when applying adhesive (1) along glass (2) edge.
-
Adhesive (1) should be applied evenly especially in height.
-
Be careful not to damage primer (3).
-
Press glass against body quickly after adhesive (1) is applied.
Adhesive amount specifications and position for back door glass
Height "a": 14 mm (0.55 in.)
Width "b": 7 mm (0.28 in.)
Width "C": 16 mm (0.63 in.)
Position "d": 14 mm (0.55 in.) for glass upper and side sections
Position "d": 15 mm (0.59 in.) for glass bottom section