Aerio AWD L4-2.0L (2003)
1) Install suspension frame (1) to body, and tighten bolt to specified torque.
Tightening torque
Suspension frame mounting bolts (a): 90 Nm (9.0 kgf-cm, 65.0 ft. lbs.)
2) Install mounting member (2), spacers and cushions to suspension frame (1) if removed and tighten bolts and nuts to specified torque.
Tightening torque
Mounting member nuts (b): 55 Nm (5.5 kgf-cm, 40.0 ft. lbs.)
Engine rear mounting nuts (9): 45 Nm (4.5 kgf-cm, 33.0 ft. lbs.)
3) Install suspension arms (2) (right & left).
4) Install stabilizer bar (3) .
