Aerio AWD L4-2.0L (2003)
Camshaft: Service and Repair
Camshaft and Valve Lash Adjuster Replacement
Removal
1. Remove engine assembly from vehicle.
2. Remove oil pan.
3. Remove cylinder head cover.
4. Remove timing chain cover.
5. Remove 2nd timing chain.
6. Remove CMP sensor.
7. To secure work in the following steps, reinstall mounting member, engine front torque bush, rear mounting and rear mounting No.2 bracket.
8. Set key on crankshaft in position as shown by turning crankshaft. This is to prevent interference between valves and piston.
9. Loosen camshaft housing bolts in such order as indicated in figure and remove them.
10. Remove camshaft housings
11. Remove camshafts.
12. Remove valve lash adjusters (2).
NOTE:
^
Never disassemble hydraulic valve lash adjuster.
^
Don't apply force (1) to body of adjuster, oil in high pressure chamber in adjuster will leak.