Aerio AWD L4-2.0L (2003)
Yellow: 2.0000 - 2.0030 mm (0.07874 - 0.07885 inch)
Blue: 2.0030 - 2.0060 mm (0.07886 - 0.07897 inch)
4) From number stamped on crank web No.2 and alphabets stamped on lower crankcase, determine new standard bearing to be installed to journal.
For example, if number stamped on crank web No.2 is "5" and alphabet stamped on lower crankcase is "A", install a new standard bearing painted
"Green to cylinder block side journal and "Black" to lower crankcase side journal.
5) Using gauging plastic (1) and scale (2), check bearing clearance with newly selected standard bearing.
If clearance still exceeds its limit, use next thicker bearing and recheck clearance.
6) When replacing crankshaft or cylinder block and lower crank case due to any reason, select new standard bearings to be installed by referring to
number stamped on new crankshaft or alphabets stamped on new lower crankcase.
UNDERSIZE BEARING (0.25 mm):
^
0.25 mm undersize bearing is available, in five kinds varying in thickness.
To distinguish them, each bearing is painted (1) in the colors at such position as indicated in figure.
Each color represents the thickness at the center of bearing.
Undersize main bearing thickness
Green & Red: 2.1160 - 2.1190 mm (0.08331 - 0.8342 inch)
