Aerio AWD L4-2.0L (2003)
10. Remove rear stiffener (17), and disconnect coolant pipe (18) from intake manifold.
11. Remove intake manifold (2) with throttle body from cylinder head, and then its gasket (1).
Installation
1. Install new intake manifold gasket (1) to cylinder head.
2. Install intake manifold (2) with throttle body. Tighten bolts and nuts to specified torque.
Tightening torque
Intake manifold bolt and nut a: 25 N.m (2.5 kg-m, 18.0 lb-ft)
3. Connect coolant pipe (1) to intake manifold and install rear stiffener (2). Tighten bolts to specified torque.
Tightening torque
Intake manifold rear stiffener bolt a: 25 N.m (2.5 kg-m, 18.0 lb-ft)
