Aerio AWD L4-2.0L (2003)
Installation
Reverse removal procedure to install heater and cooling unit noting the following instructions.
-
When installing each part, be careful not to catch any cable or wiring harness.
-
Fill engine coolant to radiator.
-
Replenish specified amount of compressor oil to compressor suction side by referring to "Replenishing Compressor Oil" in "Operation Procedure
for Refrigerant Charging:".
-
Evacuate and charge refrigerant by referring to "Operation Procedure for Refrigerant Charging:".
-
Adjust air outlet control cable and temperature control cable by referring to "Heater Controller Inspection:".