Aerio AWD L4-2.0L (2003)
Fuel Tank Pressure Release Valve: Testing and Inspection
Fuel Tank Pressure Control Valve
1. Air should pass through valve smoothly from black (3) side of valve to green (2) side when blown hard.
2. From green side, even when blown softly, air should come out of black side.
3. If air doesn't pass through valve in Step 2) or hard blow is required in Step 3), replace tank pressure control valve (1).
WARNING: DO NOT SUCK air through tank pressure control valve. Fuel vapor inside the valve is harmful.
4. Plug green nozzle and apply 26 kPa (20 cm Hg) vacuum to black nozzle. Check that vacuum is held at that level (there is no leakage).
If vacuum leaks, replace.
