Aerio AWD L4-2.0L (2003)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Idle Air Control (IAC) Valve Removal and Installation
Reference: Idle Air Control (IAC) Valve Operation Check
Removal
1. Remove throttle body from intake manifold.
2. Remove IAC valve (1) from throttle body.
Installation
Reference: Idle Air Control (IAC) Valve Inspection
For installation, reverse removal procedure noting the followings:
-
Install new gasket (1) to throttle body.
-
Tighten IAC valve screw to specified torque.
Tightening torque
IAC valve screw a: 4.0 N.m (0.4 kg-m, 3.0 lb-ft)
-
Install throttle body to intake manifold.