Aerio AWD L4-2.0L (2003)
Tightening torque
Control arm bolts (a): 90 Nm (9.0 kgf-cm, 65.0 ft. lbs.)
5) Confirm front wheel alignment.
Disassembly and Assembly
Suspension Control Arm / Bushing Disassembly and Assembly
Disassembly
1) Cut rubber (1) of flange of suspension control arm front bushing.
2) Using grinder (3), grind off flange (2) of front bushing.
CAUTION: Be careful not to damage suspension control arm (4) when grinding flange (2) of front bashing with Grinder.
3) Remove front bushing (1) using special tool (A) and hydraulic press (2).
Special Tool
(A): 09913-75821
