Aerio AWD L4-2.0L (2003)
5) Install spring seat on coil spring and then spring upper seat (1) aligning "OUT" mark (3) on spring upper seat and center of strut bracket (2).
6) Install bearing (3), strut support (2) and strut nut (1) in this sequence. Tighten strut nut (1) to specified torque.
Tightening torque
Strut nut (a): 70 Nm (7.0 kgf-cm, 50.5 ft. lbs.)
7) Install rubber cap (4).