Aerio AWD L4-2.0L (2003)
2) Install coil spring lower seat (2) and compressing coil spring, mate large-diameter spring end with stepped part of lower seat as shown.
3) Install bump stopper onto strut rod.
4) Install dust cover onto bump stopper.
5) Fit coil spring (rubber) seat (2) in coil spring upper seat (1), making sure that their depth matches all around. No part of rubber seat should stick
out higher than upper seat.
6) Pull strut rod as far up as possible and use care not to allow it to retract into strut.
7) With "OUT" mark (3) on spring upper seat (1) and the center of strut bracket (2) aligned, place upper spring seat together with spring (rubber) seat
on coil spring.
