Aerio AWD L4-2.0L (2003)
2. Install release shaft with return spring.
3. Apply grease to No.2 bush (1) inside and press-fit it by using the same special tool as in remove.
"A": Grease 99000-25010
Special Tool (A): 09922-46010
4. Coat grease to release shaft (3) oil seal (2) and then install it till it is flush with case surface. Use special tool for this installation and face seal lip
downward (inside).
"A": Grease 99000-25010
Special Tool (B): 09925-98221
5. Caulk seal at A by using caulking (4) tool and hammer.
6. Hook return spring
