Aerio AWD L4-2.0L (2003)
1. Reverse removal procedure to install propeller shaft, noting following point.
^
When installing propeller shaft, align the match marks (2). Otherwise, vibration may occur during driving.
^
Use following specification to torque each bolt and nut.
Tightening torque
Propeller shaft No.1 bolts (a): 23 Nm (2.3 kgf-cm, 17.0 ft. lbs.)
Propeller shaft No.2 bolts (b): 23 Nm (2.3 kgf-cm, 17.0 ft. lbs.)
Center coupling bolts (c): 23 Nm (2.3 kgf-cm, 17.0 ft. lbs.)
Center support nuts (d): 50 Nm (5.0 kgf-cm, 36.5 ft. lbs.)
