Aerio AWD L4-2.0L (2003)
PART(S) INFORMATION:
Gearshift lever clip replacement
1.
Apply the parking brake and set the gear shift to the neutral position.
2.
Remove the parking brake lever garnish.
Lift from the rear to start the release of the 8 clips. Lift the garnish straight upwards. Move the garnish forward enough to clear the parking brake
lever.
NOTE:
The center console parts may differ from the image due to interior changes applied to each model year. Disassembly and assembly will be the
same process.
3.
Disconnect the power port connector and move the garnish aside.