Equator 2WD V6-4.0L (2009)
Antenna Amplifier: Service and Repair
Immobilizer System Antenna Amp.: Removal And Installation
NOTE:
-
If immobilizer system antenna amp. is not installed correctly, immobilizer system will not operate properly and "DTC check" on SDT screen will
show "LOCK MODE" or "CHAIN OF IMMU-KEY".
-
Initialization is not necessary when only the immobilizer system antenna amp. is replaced with a new one.
REMOVAL
1. Disconnect the battery negative terminal.
2. Remove cluster lid A. Refer to [Instrument Panel Assembly: Exploded View].
3. Remove the bolt (A), disconnect the electrical connector (1) and remove the immobilizer system antenna amp (2).
INSTALLATION
Installation is in the reverse order of removal.