Equator 2WD V6-4.0L (2009)
Keyless Entry Receiver: Service and Repair
Remote Keyless Entry Receiver: Removal And Installation
1. Disconnect the battery negative terminal.
2. Remove the front pillar upper finisher (RH). Refer to [Body Side Trim: Component].
3. Remove the side ventilator grille (RH). Refer to [Instrument Panel Assembly: Exploded View].
4. Remove the instrument side finisher. Refer to [Instrument Panel Assembly: Exploded View].
5. Remove the upper glove box. Refer to [Instrument Panel Assembly: Exploded View].
6. Remove the bolt (A), disconnect the harness connector (1) and remove the remote keyless entry receiver (2).
Installation is in the reverse order of removal.
