Equator 2WD V6-4.0L (2009)
Keyless Entry Transmitter: Testing and Inspection
Keyfob ID Set Up Without SDT
Keyfob ID Set Up Without SDT
NOTE:
-
If a keyfob is lost, the ID code of the lost keyfob must be erased to prevent unauthorized use. A specific ID code can be erased with SDT.
However, when the ID code of a lost keyfob is not known, all controller ID codes should be erased. After all ID codes are erased, the ID codes of
all remaining and/or new keyfobs must be re-registered.
To erase all ID codes in memory, register one ID code (keyfob) five times. After all ID codes are erased, the ID codes of all remaining and/or new
keyfobs must be re-registered.
-
When registering an additional keyfob, the existing ID codes in memory may or may not be erased. If five ID codes are stored in memory, when an
additional code is registered, only the oldest code is erased. If less than five ID codes are stored in memory, when an additional ID code is
