Equator 2WD V6-4.0L (2009)
5. Disconnect fog lamp harnesses, if equipped.
6. Remove front bumper reinforcement stays RH and LH.
7. Disconnect front fender protector and front bumper upper valance from fender.
8. Disconnect front bumper upper valance from front bumper bracket center.
9. Remove front bumper assembly.
Installation
Installation is in the reverse order of removal.
PLASTIC BUMPER
Removal
1. Remove radiator grille. Refer to [Front Grille: Removal and Installation].
2. Remove front valance LH, center, then RH.
3. Remove front undercover.
4. Disconnect front portion of fender protectors LH and RH. Refer to [Front Fender Protector: Removal and Installation].