Equator 2WD V6-4.0L (2009)
Front Door Window Glass: Service and Repair
Front Door Glass: On-Vehicle Repair
REMOVAL
1. Remove the front door finisher. Refer to [Door Finisher: Removal and Installation].
2. If equipped, temporarily reconnect the power window switch.
3. For power windows, operate the power window switch to raise/lower the door window until the glass bolts can be seen.
4. For manual windows, temporarily reinstall the window crank handle and lower the window until the glass bolts can be seen.
5. Remove the inside seal.
6. Remove the glass bolts.
7. While holding the door window, raise it at the rear and pull the glass out of the sash toward the outside of the door.