Equator 2WD V6-4.0L (2009)
Rear Door Latch: Service and Repair
Rear Door Lock: Removal And Installation
REMOVAL
1. Remove the rear door module assembly. Refer to [Rear Door Glass Regulator: On-Vehicle Repair].
2. Remove the door side grommet and the bolt (TORX T30) from the grommet hole.
Torx bolt: 5.3 N.m (0.54 kg-m, 47 in-lb)
3. While pulling the outside handle (1), remove the door handle escutcheon (2).