Equator 2WD V6-4.0L (2009)
2. Make sure the cable is not offset from the grommet, and push the grommet into the lower dash panel hole securely.
3. Apply sealant around the grommet at * mark.
4. Install the cable securely to the lock.
5. Adjust the hood lock. Refer to [Hood: Fitting Adjustment].
6. Install the front fender protector LH. Refer to [Front Fender Protector: Removal and Installation].
7. Install the front grille. Refer to [Front Grille: Removal and Installation].
