Equator 2WD V6-4.0L (2009)
Console: Removal and Replacement
A/T Finisher
A/T FINISHER
Removal
1. Remove cup holder finisher.
2. Pull up to release clips, then remove the A/T finisher.
Installation
Installation is in the reverse order of removal.
Center Console
CENTER CONSOLE
Removal
1. Remove lower instrument panel RH. Refer to [Instrument Panel Assembly: Removal and Installation].
2. Remove cup holder finisher.
3. Remove A/T or M/T finisher. Refer to [Instrument Panel Assembly: Removal and Installation].
4. Remove center console screws.
