Equator 2WD V6-4.0L (2009)
Cowl Moulding / Trim: Service and Repair
Cowl Top: Removal And Installation
REMOVAL
1. Remove the front wiper arms. Refer to [Front Wiper Arms: On-Vehicle Repair].
2. Remove the cowl top seal.
3. Remove the cowl top clips and lift the cowl top, disconnect the washer tubes from the washer nozzles and remove the cowl top.
4. Release the clips and remove the LH and RH cowl top extensions.
INSTALLATION
Installation is in the reverse order of removal.
