Equator 2WD V6-4.0L (2009)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Type 2 (ABLS/ABS)
Actuator and Electric Unit (Assembly): Removal and Installation
REMOVAL
1) Disconnect the negative battery terminal.
2) Drain the brake fluid.
3) Disconnect the actuator harness from the ABS actuator and electric unit (control unit).
CAUTION:
^
To remove the brake tubes, use a flare nut wrench to prevent the flare nuts and brake tubes from being damaged.
^
Be careful not to splash brake fluid on painted areas.
4) Disconnect the brake tubes.
5) Remove the bolts and remove the ABS actuator and electric unit (control unit).