Equator 2WD V6-4.0L (2009)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Type 3 (HDC/HAS/VDC/TCS/ABS
Actuator and Electric Unit (Assembly): Removal and Installation
REMOVAL
1) Disconnect the negative battery terminal.
2) Drain the brake fluid.
3) Remove air cleaner case.
4) Disconnect the actuator harness from the ABS actuator and electric unit (control unit).
CAUTION:
^
To remove the brake tubes, use a flare nut wrench to prevent the flare nuts and brake tubes from being damaged.