Equator 2WD V6-4.0L (2009)
4) With the threaded ends of the stop lamp switch and ASCD switch contacting the pedal bracket, turn the switches 45° clockwise to lock in place.
Check that the stop lamp switch and ASCD cancel switch threaded end to brake pedal bracket gap (C) is within specifications.
CAUTION:
Make sure that the gap (C) between the brake pedal bracket and stop lamp switch and ASCD cancel switch threaded ends are within
specification.
5) Check the brake pedal for smooth operation.
CAUTION:
Make sure that the stop lamp goes off when the brake pedal is released.
6) Start the engine and check the height of the brake pedal when depressing it.
