Equator 2WD V6-4.0L (2009)
Press pistons in evenly and vary the pressing points to prevent the cylinder inner wall from being damaged.
5) Install the new upper sliding pin, lower sliding pin, and sliding pin boots on the torque member.
CAUTION:
Upper sliding pin must be replaced at each service.
6) Install the caliper body on the torque member.
Rear Brake Caliper: Exploded View [On-Vehicle Repair]
Rear Brake Caliper: Exploded View [On-Vehicle Repair]
WARNING:
Clean dust on caliper and brake pad with a vacuum dust collector to minimize the hazard of airborne particles or other materials.
CAUTION:
^
While removing caliper body never depress brake pedal because piston will pop out.
^
It is not necessary to remove bolts on torque member and brake hose except for disassembly or replacement of caliper body. In this