Equator 2WD V6-4.0L (2009)
DISASSEMBLY
CAUTION:
^
Master cylinder sub-assembly cannot be disassembled.
^
Remove reservoir tank only when absolutely necessary.
^
While working, cover the primary piston rod with cloth to prevent it from being damaged.
^
Never use mineral oils such as kerosene, gasoline during the cleaning and assembly process.
^
Do not drop parts. If part is dropped, do not use it.
1) Secure the flange of the master cylinder sub-assembly in vise.
CAUTION:
^
Use copper plates or cloth to cover the flange before securing it in the vise.
^
When securing the master cylinder sub-assembly in vise, be sure not to over-tighten the vise.
2) Remove the pin and pull the reservoir tank off of the master cylinder sub-assembly.
