Equator 2WD V6-4.0L (2009)
Parking Brake Shoe: Service and Repair
Parking Brake Shoe: Removal and Installation
Parking Brake Shoe: Removal and Installation
REMOVAL
WARNING:
Clean the brakes with a vacuum dust collector to minimize the hazard of airborne particles or other materials.
NOTE:
Remove the rear disc rotor only with the parking brake lever completely disengaged.
1) Remove the rear disc rotor.
2) Remove the return springs.
3) Remove the adjuster.
4) Remove the retainers, anti-rattle pins and shoes.
5) Remove the pin retainer, then disconnect the parking brake cable from the toggle lever.
6) Remove the back plate.
INSPECTION AFTER REMOVAL
Lining Thickness Inspection
^
Check the thickness of the shoe lining.
A: