Equator 2WD V6-4.0L (2009)
4) Install the brake booster using new nuts.
CAUTION:
Do not reuse the brake booster and brake pedal assembly nuts.
5) Install the brake master cylinder.
6) Install the brake piping to the brake master cylinder.
7) Connect the brake booster vacuum hose and check valve to the brake booster.
8) Adjust the brake pedal height.
9) Tighten the input rod lock nut to specification.
10) Install the ABS actuator and electric unit (control unit).
11) Refill with new brake fluid and bleed the air.