Equator 2WD V6-4.0L (2009)
Vacuum Brake Booster: Service and Repair
Vacuum Lines: Removal and Installation
Vacuum Lines: Removal and Installation
REMOVAL
1) Disconnect brake booster hose from hose clip bracket.
2) Release the brake booster hose clips and remove the brake booster hose.
3) Remove the check valve from the brake booster.
INSTALLATION
Installation is in the reverse order of removal.
^
Insert vacuum hose onto tube and brake booster vacuum check valve for minimum length (A) before installing the brake booster hose clips.
CAUTION:
Do not use lubricating oil during installation.