Equator 2WD V6-4.0L (2009)
Oil Filter: Service and Repair
Oil Filter Removal and Installation [VQ40DE]
REMOVAL
1) Remove the engine front undercover using power tool.
2) Remove the oil filter using Tool as shown.
Tool number: KV10115801 (J-38956)
WARNING:
Be careful not to burn yourself, as the engine and engine oil may be hot.
CAUTION:
^
Oil filter is equipped with a pressure relief valve.
^
Use Genuine Oil Filter or equivalent.
^
When removing, prepare a shop cloth to absorb any engine oil leaks or spills.
^
Do not allow engine oil to adhere to drive belts.
^
Completely wipe off any engine oil that adheres to the engine and the vehicle.
INSTALLATION
1) Remove foreign materials adhering to the oil filter seal mating surface.
2) Apply clean engine oil to the oil filter seal circumference of the new oil filter as shown.
