Equator 2WD V6-4.0L (2009)
Tool number: KV10111100 (J-37228)
CAUTION:
^
Be careful not to damage the mating surfaces.
^
Do not insert screwdriver, this will damage the mating surfaces.
NOTE:
Tap (1) Tool to insert it and then slide (2) it by tapping on the side of the Tool as shown.
INSPECTION AFTER REMOVAL
Clean oil strainer if any object attached.
INSTALLATION (Lower)
1) Install oil pan (lower) as follows:
a) Use scraper to remove old liquid gasket from mating surfaces.