Equator 2WD V6-4.0L (2009)
8) Disconnect A/T fluid cooler tube brackets and position out of the way.
9) Remove oil filter, as necessary.
10) Remove oil cooler.
11) Remove oil pan (lower).
12) Remove oil strainer.
13) Remove transmission joint bolts which pierce oil pan (upper).
14) Remove rear cover plate.
15) Remove oil pan (upper) bolts with power tool in reverse order as shown.
^
Insert Tool between oil pan (upper) and lower cylinder block. Tap (1) Tool to insert it and then slide (2) it by tapping on the side as shown.