Equator 2WD V6-4.0L (2009)
Limit: 0.1 mm (0.004 in)
^
If it exceeds the limit, replace intake manifold.
INSTALLATION
Installation is in the reverse order of removal. Note the following:
Intake Manifold
^
If stud bolts were removed from cylinder head, install them and tighten to the specified torque.
Intake manifold studs :11.0 Nm (1.1 kg-m, 8 ft-lb)
^
Tighten all nuts and bolts to the specified torque in two or more steps in numerical order as shown.