Equator 2WD V6-4.0L (2009)
NOTE:
Though camshaft does not stop at the position as shown, for the placement of cam nose, it is generally accepted camshaft is placed for the same
direction of the figure.
Camshaft dowel pin hole (intake side): At cylinder head upper face side in each bank.
Camshaft dowel pin (exhaust side): At cylinder head upper face side in each bank.
Crankshaft key: At cylinder head side of right bank.
CAUTION:
Hole on small dia. side must be used for intake side dowel pin hole. Do not mis-identify (ignore big dia. side).
5) Install timing chains (secondary) and camshaft sprockets as follows:
CAUTION:
Mating marks between timing chain and sprockets slip easily. Confirm all mating mark positions repeatedly during the installation
process.
a) Push plunger of timing chain tensioner (secondary) and keep it pressed in with stopper pin.