Equator 2WD V6-4.0L (2009)
CAUTION:
Do not allow timing chain case to pinch O-rings when installing water pump.
^
Make sure that timing chain and water pump sprocket are engaged.
^
Insert water pump by tightening bolts alternately and evenly.
3) Install timing chain tensioner (primary) as follows:
a) Remove dust and foreign material completely from backside of timing chain tensioner (primary) and from installation area of rear timing chain
case.
b) Turn crankshaft pulley clockwise so that timing chain on the timing chain tensioner (primary) side is loose.
c) Install timing chain tensioner (primary) with its stopper pin attached.
CAUTION:
Be careful not to drop bolts inside timing chain case.
d) Remove stopper pin.
