Equator 2WD V6-4.0L (2009)
CENTER VENTILATOR DUCT
Removal
1. Remove the heater and cooling unit assembly. Refer to [Heater & Cooling Unit Assembly: Component].
2. Remove the defroster nozzle.
3. Remove the RH and LH ventilator ducts.
4. Remove the RH and LH side demister ducts.
5. Remove the center ventilator duct.
Installation
Installation is in the reverse order of removal.
FLOOR CONNECTOR DUCT
Removal
1. Remove the heater and cooling unit assembly. Refer to [Heater & Cooling Unit Assembly: Component].
2. Remove the floor connector duct.
Installation
Installation is in the reverse order of removal.
FRONT AND REAR FLOOR DUCTS
Removal
1. Remove the floor carpet. Refer to [Floor Trim: Removal and Installation].
2. Remove the clips and front and rear floor ducts.
Installation
Installation is in the reverse order of removal.
GRILLES
Removal
1. Remove the interior trim panel as necessary that contains the grille to be removed. Refer to [Body Side Trim: Component] and [Instrument Panel
Assembly: Exploded View].
2. Remove the grille from the interior trim panel.
Installation
Installation is in the reverse order of removal.
