Equator 2WD V6-4.0L (2009)
Transmission Shift Position Indicator Lamp: Service and Repair
Without Power Door Locks
A/T FINISHER LAMP
Removal
1. Remove A/T finisher from center console. Refer to [Shift Control System: Exploded view].
2. Rotate A/T finisher lamp socket (2) with bulb (3) counterclockwise, then pull away from finisher (1).
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Remove A/T finisher from center console. Refer to [Shift Control System: Exploded view].
2. Remove A/T finisher lamp socket (1), then pull bulb (2) straight out away from socket.