Equator 2WD V6-4.0L (2009)
Glove Box Lamp: Service and Repair
Without Power Door Locks
GLOVE BOX LAMP
Removal
1. Remove lower instrument panel RH and glove box. Refer to [Instrument Panel Assembly: Removal and Installation].
2. Rotate glove box lamp socket (3) with bulb (1) counterclockwise, then pull away from lamp shield (2) on steering member to remove.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Disconnect the negative battery terminal.
2. Remove glove box lamp.
3. Pull bulb (2) straight out from glove box lamp socket (1) to remove.