Equator 2WD V6-4.0L (2009)
Dome Lamp: Service and Repair
Without Power Door Locks
ROOM LAMP
Removal
1. Disconnect the negative battery terminal.
2. Using a suitable tool (A), release the pawls and remove the room lamp lens (1).
CAUTION: Wrap a cloth around tool to protect the housing and lens.
3. Remove room lamp screws (2).
4. Disconnect the connector, then remove room lamp.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Disconnect the negative battery terminal.
2. Using a suitable tool, release the pawls and remove the room lamp lens.