Equator 2WD V6-4.0L (2009)
Headlamp Bulb: Service and Repair
Headlamp: Bulb Replacement
CAUTION: Leaving bulb removed from the headlamp housing for a long period of time can deteriorate the performance of the lens and
reflector (dirt, clouding). Always prepare a new bulb and have it on hand when replacing a bulb.
HEADLAMP
Removal
1. Turn front headlamp switch OFF.
2. Disconnect the electrical connector.
3. Rotate the headlamp bulb retaining ring counterclockwise and remove.
4. Pull the headlamp bulb straight out from the headlamp assembly.
CAUTION: Grasp only the plastic base when handling headlamp bulb. Never touch the glass envelope.
Installation
Installation is in the reverse order of removal.
CAUTION: After installing bulb, be sure to install the bulb socket and plastic cap securely to ensure watertightness.
FRONT TURN SIGNAL/PARKING LAMP
Removal
1. Turn the bulb socket counterclockwise to unlock it.
2. Pull the bulb to remove it from the socket.
Installation
Installation is in the reverse order of removal.
CAUTION: After installing bulb, be sure to install the bulb socket and plastic cap securely to ensure watertightness.
FRONT SIDE MARKER LAMP
Removal
1. Turn the bulb socket counterclockwise to unlock it.
2. Pull the bulb to remove it from the socket.
Installation
Installation is in the reverse order of removal.
CAUTION: After installing bulb, be sure to install the bulb socket securely for watertightness.
