Equator 2WD V6-4.0L (2009)
Air Bag(s) Arming and Disarming: Service and Repair
Collision Diagnosis: For Side and Rollover Collision
Collision Diagnosis: For Side And Rollover Collision
Check the SRS components using the following table.
-
After the work is completed, perform self-diagnosis to check that no malfunction is detected. Refer to [SRS Operation Check]. See: Restraint
Systems/Testing and Inspection/Component Tests and General Diagnostics
WHEN SRS IS ACTIVATED IN THE SIDE OR ROLLOVER COLLISION
1. Replace the following components:
-
Front seat back assembly (on the side on which side air bag is activated)
-
Diagnosis sensor unit
-
(LH or RH) side air bag (satellite) sensor (on the side on which side air bag is activated)
2. Check the SRS components and the related parts using the following table.
-
Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation).
3. Conduct "DTC check" using SDT and "AIR BAG" warning lamp. Refer to [SRS Operation Check] See: Restraint Systems/Testing and
Inspection/Component Tests and General Diagnostics for details. Ensure entire SRS operates properly.
WHEN SRS IS NOT ACTIVATED IN THE SIDE OR ROLLOVER COLLISION
1. Check the SRS components and the related parts using the following table.
-
If the front seat back assembly is damaged, the front seat back assembly must be replaced.
2. Conduct "DTC check" using SDT and "AIR BAG" warning lamp. Refer to [SRS Operation Check] See: Restraint Systems/Testing and
Inspection/Component Tests and General Diagnostics for details. Ensure entire SRS operates properly.
SRS INSPECTION (FOR SIDE AND ROLLOVER COLLISION)