Equator 2WD V6-4.0L (2009)
5) For the measured value out of the standard, perform adjustment.
ADJUSTMENT
^
Perform adjustment depending on selected head thickness of valve lifter.
1) Measure the valve clearance.
2) Remove camshaft.
3) Remove valve lifters at the locations that are out of the standard.
4) Measure the center thickness of removed valve lifters with micrometer.
5) Use the equation below to calculate valve lifter thickness for replacement.
Valve lifter thickness calculation: t = t1 + (c1 - c2)
t = Valve lifter thickness to be replaced
t1 = Removed valve lifter thickness