Equator 2WD V6-4.0L (2009)
Wheel Hub: Testing and Inspection
Wheel Hub: On-Vehicle Inspection and Service
Make sure the mounting conditions (looseness, backlash) of each component and component status (wear, damage) are normal.
WHEEL BEARING INSPECTION
^
Move wheel hub in the axial direction by hand. Make sure there is no looseness of wheel bearing.
Axial end play limit: 0.05 mm (0.002 in) or less
^
Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there are any irregular conditions, replace wheel hub and
bearing assembly.
