Equator 2WD V6-4.0L (2009)
a. Install new O-ring to fuel tube as shown.
-
When handling new O-rings, be careful of the following caution:
CAUTION:
-
Handle O-ring with bare hands. Never wear gloves.
-
Lubricate new O-ring with new engine oil.
-
Do not clean O-ring with solvent.
-
Make sure that O-ring and its mating part are free of foreign material.
-
When installing O-ring, do not scratch it with tool or fingernails.
-
Do not twist or stretch O-ring. If O-ring was stretched while it was being attached, allow it to retract before inserting it into fuel
tube.
-
Insert new O-ring straight into fuel tube. Do not angle or twist it.
b. Install spacer to fuel damper.
c. Insert fuel damper straight into fuel tube.
CAUTION:
-
Insert straight, making sure that the axis is lined up.
-
Do not pressure-fit with excessive force.
Reference value : 130 N (13.3 kg, 29.2 lb)
-
Insert fuel damper until (B) is touching (A) of fuel tube.