Equator 2WD V6-4.0L (2009)
Tool number : -(J-45722)
12. Disconnect the EVAP hose from the molded clip in the top of the fuel tank.
13. Remove the fuel level sensor, fuel filter, and fuel pump assembly. Remove and discard the fuel level sensor, fuel filter, and fuel pump assembly
O-ring.
CAUTION:
-
Do not bend the float arm during removal.
-
Avoid impacts such as dropping when handling the components.
INSTALLATION
Installation is in the reverse order of removal.
-
For installation, use a new fuel level sensor, fuel filter, and fuel pump assembly O-ring.
-
Connect the quick connector as follows:
a. Check the connection for any damage or foreign materials.
b. Align the connector with the pipe, then insert the connector straight into the pipe until a click is heard.
c. After connecting the quick connector, make sure that the connection is secure by checking as follows:
