Equator 2WD V6-4.0L (2009)
Ignition Coil: Service and Repair
Ignition Coil Removal and Installation
Ignition Coil: Removal and Installation
REMOVAL (LH)
1. Remove engine room cover using power tool.
2. Remove air cleaner case and air duct and resonator assembly.
3. Move aside harness, harness bracket, and hoses located above ignition coil.
4. Disconnect the harness connector from ignition coil.
5. Remove the ignition coil.
CAUTION: Do not shock ignition coil.
INSTALLATION (LH)
Installation is in the reverse order of removal.
REMOVAL (RH)
1. Remove intake manifold collector.
2. Move aside harness, harness bracket, and hoses located above ignition coil.
3. Disconnect the harness connector from ignition coil.
4. Remove the ignition coil.
CAUTION: Do not shock ignition coil.
INSTALLATION (RH)
Installation is in the reverse order of removal.