Equator 2WD V6-4.0L (2009)
12) Remove bracket for the differential lock position switch connector and bolts.
13) Remove differential lock position switch.
INSTALLATION
1) Apply sealant to threads of differential lock position switch.
^
Use Genuine Silicone RTV or equivalent.
CAUTION:
Remove old sealant adhering to gear carrier and differential lock position switch Also remove any moisture, oil, or foreign material
adhering to application and gear carrier and differential lock position switch.
2) Install differential lock position switch on gear carrier and tighten differential lock position switch bolts with the specified torque.
